1997-12-19 Required Sign Criteria~r
/ t -0~
REQUIRED SIGN CRITERIA
Phase
Minneapolis Outlet Center -Albertville, Minnesota
December 19,1997
I. GENERAL
A. All proposed signage must be approved in writing by Landlord prior to fabrication
and/or installation.
B. Submitted applications will include scaled drawings detailing the following:
1. Materials and colors.
2. Dimensions.
3. Illumination detail.
4. Mounting detail
C. All portions of sign construction and/or installation detail will meet requirements set
forth by Owner, subject to local, state or other municipal approval.
D. Sign installation crews are to report to the Owner's Field Representative or mall
manager upon arrival at job site. Failure to do so may result in removal and
relocation of signs, fascia repair, etc. at sign contractor's expense.
•
E. All cutting and patching shall be subject to the direction and approval of the General
Contractor. The Subcontractor shall not endanger the stability of the structure by
cutting, digging, etc., and shall not cut or alter the work of any other Contractor.
F. Proof of sign permit will be required before installation of any signs, and will be
subject to approval by Owner's Field Representative. Any cutting, drilling, etc.
of the building fascia will be sealed to prohibit moisture entering the building.
G. Sign installation contractor to field verify fascia height to determine if lift truck, etc.
will be required.
H. Landlord's responsibility relative to Tenant's signs is limited to approval solely of
Landlord's purpose, and Tenant bears the full and final responsibility, financial and
otherwise, for the following, relative to Tenant's signs:
1. Meeting all applicable regulatory, approval, code and permit requirements.
2. Proper installation, operation, maintenance and repair of Tenant's signage.
3. If Tenant changes artwork and/or design of sign or vacates space, Tenant
bears the full responsibility and expense to remove signage and restore or
replace fascia fo its original condition. If signage has not been removed
and/or does not meet Landlord's approval, Landlord shall complete and back
charge Tenant all cost to complete said work.
Landlord reserves the right, at its discretion, to install other tenant's signage on
Tenant's exterior walls.
EXHIBIT C
' ..~
REQUIRED SIGN CRITERIA Rvs.12/1s1s7
• Minneapolis Outlet Center -Albertville, Minnesota
II. ILLUMINATED STORE IDENTITY SIGNS (by Tenant)
A. Sign Description:
1. Internally illuminated, individual channel letters, mounted directly to a
raceway to be attached to the building facade.
OR
2. Intemally illuminated, individual channel letters, mounted directly to building
facade.
B. Materials:
1. Letters must be made of noncorrosive aluminum, .063 minimum on sides
and .080 minimum on backs and will be welded, no exposed fasteners or
wooden backs allowed.
2. Letter faces shall be 1/8" Rhom-Haas, translucent plexiglass (7328 White).
3. Retainer shall be 3/4" Jewelite.
. 4. 60 MA transformers.
5. Lexan face (no PK housing).
6. Must be UL approved.
C. Color Specifications:
1. Letter faces: 7328 white
2. Letter sides and backs: 313 Dark Bronze (example: Duradonic 313E)
3. Trimcap: 313 Dark Bronze (example: Duradonic 313E)
4. Signage Raceway (if required): Contact Landlord to verify color.
D. Size:
1. Maximum overall sign height not to exceed 48 . However, the overall sign
height of the anchor tenants may be greater than 48". Maximum length not
to exceed dimensions shown on elevation drawing. Signage to be centered
within these dimensions. Landlord wilt establish maximum sign sizes for
each tenant to ensure the architectural integrity of the building elevation as
a whole.
•
-2-
r .~ ~ ,
REQUIRED SIGN CRITERIA Rvs.12/19/97
. Minneapolis Outlet Center -Albertville, Minnesota
E. Illumination:
1. All portions of Tenant's sign are required to be illuminated with White neon.
Minimum requirement is' 13 mm. All parts of sign must burn continuously
when lit.
F. All sign components and installation procedures shall carry a UL label.
G. Sign Location:
1. Positioning of lit signs may vary. Sign location drawing to be provided by
Owner.
H. Owner/Landlord will furnish electrical junction box centered behind sign band from
Tenant's panel. Sign contractor to contract final electrical connection.
I. Specifically not permitted; but not limited to:
1. Any flashing action, moving action, or audible action sign parts.
2. Listing of products, unless part of name of logotype.
3. Plastic molded letters, illuminated or otherwise.
4. Cabinet or box signs.
5. Visible ballasts or transformers.
III. UNDERCANOPY SIGNS
Landlord to provide with Tenant reimbursing the cost to Landlord.
1'-0" high x 3'-0" long.
IV. BACK DOOR LETTERING (by Landlord)
A. Each store will have one set of 4" vinyl cut letters with store name. List of products
will not be permitted unless part of name.
-3-
1~
u
__ _--- ..
':..~..
~~ ~ __
_.. ~ :.r_~-_ .._.~.. - ._. _ .._ _ ..._ . - i a.~
~~ ~
.~
___ -~-
~:U~~~~
`:
1~
•
e
•